Home Depot KENNESAW UC42V-NI-SHC Guía De Uso Y Cuidado página 8

Installation (continued)
Attaching the fan blades
NOTE: Your fan blades are reversible. Select the blade side
above procedure could result in fan wobble.
Mount the blade holders (D) to the fan blades (E) using the
screws (1) provided – 3 per blade (Figure 12). Please note
the rubber washers are pre-attached to the blade holder
(D).
The fan blade assemblies attach to the motor using the blade
holder screws (2) that are pre-installed into the blade holder (D).
The procedure to attach blade assemblies is as follows:
1
E
D
UC195-YI
THD_UC42V-NI/WH-SHC_UC195-YI_Eng
Figure 12
Position the blade holder (D) under the motor such that the
the motor (Figure 13).
Tighten the pre-installed blade holder screws (2).
Repeat these steps to install the remaining blade
assemblies.
3
Figure 13
8
D
2
18年7月04日 下午17:00