Haier YR-E17 Manual De Operación E Instalación página 18

Operation
Humidity Function (Only valid for part of models)
Press the mode key to switch to the dry mode, and the humidity will be shown in the temp. display
area. The Up/Down key is the humidity adjusting key.
Energy Saving
(1) Press key to enter function setting, then press to choose energy saving, press key
again to confirm the operation and display energy saving icon . If energy saving function has
been set, the above operation will cancel it.
(2)The energy saving default parameter are 23°C (74°F) (the lowest temp. limit of cooling and dry
mode) and 26°C (78°F) (the highest temp. limit of heating mode). The temp. adjusting range is
23°C-30°C (74°F-80°F) in cooling and dry mode, the temp. adjusting range is 16°C-26°C (60°F-78°F)
in heating mode. If energy saving function is set, the indoor units will run at the default temperature.
Note: Fresh Air unit has no energy saving function.
Filter Cleaning
When filter cleaning icon is displayed, the icon will display in function sequence. If filter cleaning
icon is flashing, press key to clear it.
10°C Heating Function (Only valid for part of models)
(1) Only in heating mode, this function is valid in function circulation.
(2) For the four-way cassette model, press the SET key for 5s to enter the function circulation. When it
switches to the 10°C heating function, 10°C will flash in the temp. display area. Press the SET key to
confirm, and 10°C will be statically displayed.
15