Erbauer EPM18-Li Instrucciones Originales página 16

HOW TO REDUCE THE AMOUNT OF DUST?
1. Reduce the amount of cutting by using the best sizes of
building products.
2. Use a less powerful tool e.g. a block cutter instead of
angle grinder.
3. Using a different method of work altogether – e.g. using
a nail gun to direct fasten cable trays instead of drilling
holes first.
Please always work with approved safety equipment, such
as those dust masks that specially designed to filter out
microscopic particles and use the dust extraction facility at all
time.
For more information please see the HSE website:
http://www.hse.gov.uk/construction or http://www.hse.gov.uk/
pubns/cis69.pdf
WARNING! Some dust particles created by power
sanding, sawing, grinding, drill and other construction
jobs contain chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and
other masonry products.
• Arsenic and chromium from chemically treated
timber.
Your risk from these exposures varies, depending
upon how often you do this type of work. To reduce
your exposure to these dusts:
• Work in a well-ventilated.
• Work with approved protective equipment, such
as those dust masks that are specially designed
to filter microscopic particles.
16
MNL_Erbauer_18V DC Paddle Mixer_EPM18-Li_V2_220117 II.indd 16 1/17/22 12:21 PM