Publicidad
Idiomas disponibles
Idiomas disponibles
USING AND CLEANING PRODUCT
Placement:
Place the product on a level floor or table free of any obstructions.
•
Place the product in locations where it will not come in contact with direct sunlight, or hot air from air
conditioning or heating appliances. Such contact can cause the product to deform, change color, or
malfunction.
•
Do not place the product near the radio or TV. The product may cause noise on radio and affect the
TV signal.
Use with Air Conditioner
Use with a Heater
Placing the product in front of air
Sending air flow to corner of the
conditioner to circulate cold air
room where the A/C source is, to
accumulated below creates air
circulate warm air accumulated
flow and provides better cooling.
above, warms feet.
Ventilation
Two-room Circulation
Placing the product by a widow
Placing the product in an open
or a door draws outside air in and
doorway circulates air between
sends in-room air out.
two-rooms.
Product Parts:
Handle
Front guard
Vane
Control panel
Base
FRONT
Circulation
Sending air flow toward the
ceiling reduces room air
temperature variations.
Drying Laundry
Hanging laundry directly in the
path of air flow helps it dry
quicker.
Rear guard
Motor
Main body
Power cord &
Power plug
REAR
3
How to Use:
Connecting the power plug
Operation
Insert the power plug securely all
Turning the knob selects the
the way into the electric socket.
desired air flow strength.
Vertical (manual)
Vertical angle can be adjusted
manually across six steps from
20 degrees to 90 degrees.
How to Clean:
Using the product in dusty condition can cause it to malfunction. Check and clean the product regularly.
INTERNAL
CLAWS
SCREW
1.
Unscrew the screw on the back cover of the fan.
2.
Press in and disengage the 4 claws on the top and bottom of the front
guard, and then remove the front guard by pulling it toward you.
3.
Remove debris using a vacuum cleaner. Wipe off debris that cannot be
removed by vacuuming using a soft cloth.
4.
Align claws on the top and bottom of the front guard with the guides on
the back of the guard, and press until it snaps into place.
Always turn off the power and unplug the power plug from the electric socket when cleaning the product. Use
caution, the motor will be hot immediately after use. Confirm the motor has cooled before cleaning the product.
Caution
• Do not use paint thinner, alcohol, benzene, alkaline detergent, or bleach, etc. when cleaning the product.
Using such substances can cause damage, malfunctions, or changes in color, shape, and quality.
OFF
AIR FLOW
OFF
Stop
Turn the knob to OFF to stop
operation.
EXTERNAL
Wipe lightly using a
soft cloth.
For hard to remove
dirt, wipe using a
cloth containing
a diluted neutral
detergent.
4
Publicidad
