ATTENTION
1. Use single-phase 120V voltage.
2. Children are forbidden to use this machine. Regardless of any circumstance, do not touch the steel plate
when it is rotating.
3. You must use a ground socket; keep the cable away from heat sources; do not connect the cable and
electrical sockets near water or other liquids; do not use cables, power plugs and sockets that are
damaged.
4. To be placed on a flat and level surface, the ice should be kept as even as possible; otherwise it can cause
excess vibrations.
5. The ice volume should be kept below the red line of 1cm in the ice tank.
6. Please only use a cloth to scrub the ice tank, do not spray with water.
7. Ensure all excess water is cleaned out after operation.
8. Do not touch the blade when cleaning to avoid cutting your fingers.
9. Do not dismantle the motor. When cleaning or repairing the machine, you should first turn off the power
switch and unplug from the socket. Do not keep the machine running without any ice being introduced for
more than 15 minutes.
10. The machine can not be cleaned with detergents, avoid using chemical substances on the machine. It also
can not be directly washed with water, doing so will damage the electrical components of the machine.
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can therefore be disposed of
without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
1 YEAR PARTS AND LABOUR WARRANTY
Safety and Warranty
5