STEP 20
Attached the back panel as shown nailing straight into the raw edges across the
top and bottom and using screws (8) to screw into back of legs I and J.
11
8
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
8
11
(x28)
(x10)
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
F
J
28
R
E
Flush bottom edge of the back panel
with the bottom edge of left bottom
(E) and right bottom (F).
8
I