Danby DBC121A1BLP Manual Del Propietário página 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and the upper hinge
from the top right side of the cabinet. Remove
the door from the cabinet. Remove the screw
hole covers from the top left side of the cabinet
and install them on the top right side of the
cabinet.
2. Remove the screw hole cover from the top left
side of the door. Install the screw hole cover on
the top right side of the door.
3. Remove the lower hinge from the lower right
side of the cabinet. Install the lower hinge on the
lower left side of the cabinet.
4. Install the door onto the lower hinge. Install the
upper hinge on the top left side of the cabinet.
Before tightening the screws of the upper hinge,
ensure that the top of the door is level with the
top of the cabinet and that the rubber gasket is
making a good seal with the cabinet all the way
around. Install the hinge cover on the top left
side of the cabinet.
1
2
3
5