FujiFilm FP-Z6000 Manual Básico página 59

Turning the Projector On Turning the Projector On
1 Turn the power switch on.
The projector will switch to standby mode.
The indicator lamps will light or fl ash red.
Press the power button to turn the projector on.
2
The indicator lamps will light green.
Projection will start after a brief pause.
4
CAUTIONS
Switching to Standby Switching to Standby
Pressing the power button while the projector is on displays a confi rmation dialog. Press
the button again to switch the projector to standby. The cooling fan will turn off a few
seconds later.
• Do not look directly into the lens while the projector is on.
• The projector automatically switches to standby about three seconds after
the lens is returned to the storage position.
Remote control
Using the Remote Control
Remote control
Projector
EN-23
Projector