*Before setting the time , check that the chronograph measurement is stopped.
1.Pull out the crown when
the second hand is at
the 12 o'clock position.
The second hand will
stop on the spot.
・The measured time is indicated by the stopwatch hands that move independently of the center hands.
・The stopwatch can measure up to 60 minutes in 1/10 seconds.
(Standard measurement)
Ex) 100m race (Press the buttons in the following order
Stopwatch minute hand
Stopwatch second hand
TIME SETTING
Crown
2.Turn the crown to set the
hour , minute hands to the
desired time.
* Do not press any button.
Otherwise, the chronograph
hands will move.
HOW TO USE THE STOPWATCH
START
STOP (Finish)
Stopwatch 1/10 second hand
A
9.8/10 second
SII Products
OPERATION
A
A
B
RESET (Reset to "0'00")
A
3.Push the crown back in to
the normal position in accordance
with a time signal.
)
B
Version-03
VD55B
8