Velleman CAMIP10N Manual Del Usuario página 12

 When connected to a DHCP router, check the Obtain IP from DHCP
server checkbox, otherwise uncheck it and fill in the data
manually.
 In case of a subnet mismatch, change the IP-address or subnet
mask.
 When in doubt about the network settings, contact a qualified
network administrator.
Upgrade firmware
 Only use this option when problems with the current version are
noticed. Do not upgrade if the camera works fine.
 Caution: when the upgrade process is interrupted or a wrong
version is installed the camera might not work anymore.
Refresh Camera List
Use this option to update the camera list, for example when a new
camera is added to the network.
Flush ARP Buffer
When both a wireless and wired connection to a camera exists, a
problem with the ARP (Address Resolution Protocol) may arise
resulting in the camera not being accessible via the browser.
In this case the ARP buffer should be flushed.
V. 02 – 22/02/2013
CAMIP10N
12 ©Velleman nv