Shark Rocket AH401 Manual página 6

USAGE
The Shark Rocket Powerhead has a 2-speed POWER slider switch on the handle.
® ®
LO
Brushroll spins slowly
CHOOSING THE APPROPRIATE SETTING
Deep Clean Carpet Brushroll
• LO - For gentle on hard floors and area rugs
• HI - For deep-cleans carpets by removing embedded dirt
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use
the carpet brushroll on HI setting with the SUCTION CONTROL closed�
1 Plug the unit into an electrical outlet�
2 Slide the POWER switch to the LO position to gently clean hard floors and
area rugs� The Brushroll will spin slowly�
3 Slide the POWER switch to the HI position to deep-clean carpets by
removing embedded dirt� The Brushroll will spin quickly�
NOTE: Before vacuuming your delicate area rugs or carpets, refer to the
manufacturer's recommended cleaning instructions�
SUCTION RELEASE
This unit has a Suction Control Button to help
with push and pull on high-pile carpets and to
release suction when vacuuming area rugs� Open
to minimize suction� Be sure to close again for
maximum suction�
5
Gentle Touch Hard Floor Brushroll
• LO - For large and heavy debris pickup
• HI - For loose and stuck-on dust and debris
1 Plug the unit into an electrical outlet�
2 Slide the POWER switch to the LO position to clean large and heavy
debris� The Brushroll will spin slowly�
3
Slide the POWER switch to the HI position to clean loose and stuck-
on dust and debris� The Brushroll will spin quickly�
NOTE: The brushroll will not spin unless the Telescoping Wand is reclined�
Less Suction
open
www.sharkrocketpowerhead.com
HI
Brushroll spins quickly
More Suction
closed