LG 43LF540T Guía Rápida De Configuración página 20

To set advanced control
SETTINGS ➾ PICTURE ➙ Picture Mode ➙
Advanced Control / Expert Control
For each picture mode, screen can be calibrated;
or for a special screen, picture settings can be
adjusted. Select the desired Picture Mode.
• Dynamic Contrast Adjusts the contrast to
the optimal level according to the image's
brightness.
• Dynamic Color Adjusts colors to make the
image appear in more natural colors.
• Color Gamut Selects the range of colors that can
be expressed.
• Skin Color Skin color spectrum can be
separately set to implement the skin color as
defined by the user.
• Sky Color Sky color is set separately.
• Grass Color Natural color spectrum (meadows,
hills, etc.) can be separately set.
• Gamma Sets the gradation curve according to
the output of picture signal in relation to the
input signal.
• Edge Enhancer Shows clearer and distinctive
yet natural edges of the video.
• Expert Pattern Patterns used for expert
adjustment.
• Color Filter Filters a specific color spectrum in
RGB colors to fine-tune color saturation and hue
accurately.
• Color Temperature Adjusts the overall tone of
the screen as desired. In Expert mode, detailed
fine-tuning can be set via Gamma method, etc.
• Color Management System This system is used
by experts to adjust color with a test pattern.
They can select from six color areas (Red/ Green/
Blue/ Cyan/ Magenta/ Yellow) without affecting
other colors. For normal images, adjustments
may not result in noticeable color changes.
• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.
12
To set additional picture options
SETTINGS ➾ PICTURE ➙ Picture Mode ➙ Picture
Option
Adjusts detailed setting for images.
• Noise Reduction Eliminates noise in the picture.
• MPEG Noise Reduction Eliminates noise
generated while creating digital picture signals.
• Black Level Adjusts the brightness and contrast
of the screen to suit the black level of the input
picture by using the blackness (black level) of
the screen.
• Real Cinema Optimizes the screen for movie
viewing.
• Motion Eye Care [Depending upon model]
Saves power consumption by adjusting the
brightness corresponding to the movement of
the image on the screen.
• Depending upon input signal or other picture
settings, the range of detailed items for
adjustment may differ.
To use Energy Saving feature
SETTINGS ➾ PICTURE ➙ Energy Saving
Saves electric power by adjusting screen
brightness.
• Off Turns off the Energy Saving.
• Minimum / Medium / Maximum Applies the
pre-set Energy Saving.
• Screen Off Screen is turned off and only sound is
played. Press any button except Power button on
the remote control to turn the screen back on.
To use TV speaker
(Except for LF540T / LF5400 / LF541T /
LF5410 Series)
SETTINGS ➾ AUDIO ➙ Sound Out ➙
TV Speaker
Sound is output through the TV speaker.
To use External Speaker
(Except for LF540T / LF5400 / LF541T /
LF5410 Series)
SETTINGS ➾ AUDIO ➙ Sound Out ➙
External Speaker (Optical)
[Available only on models with an optical port]
Sound is output through the speaker connected to
the optical port.
• SIMPLINK is supported.