Descargar Imprimir esta página

Husky HOTC7218B12M Guía De Uso Y Mantenimiento página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
1
Locking and unlocking the unit
 
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ To lock the unit, insert the key (I) into the lock (J) and turn
it one quarter turn counterclockwise. Then remove the key.
□ To unlock the unit, insert the key (I) into the lock (J) and
turn it one quarter turn clockwise. Then remove the key.
I
3
Installing the drawers
 
□ Pull the slides and slide carrier out until fully extended .
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
2
Removing the drawers
 
Fully extend and empty the drawer.
□ On the slide, lift up the plastic release lever on one slide
and push down the plastic release lever on the other slide.
Gently pull the drawer out so the slides can ride over
the stops.
Please contact 1-888-HD-HUSKY for further assistance.
HUSKYTOOLS.COM

Publicidad

loading

Este manual también es adecuado para:

Hotc7218b31m/bj1m1005 011 4611005 011 4591005 054 479