Publicidad
Idiomas disponibles
Idiomas disponibles
READ ME FIRST:
Thank you for purchasing a Front Runner Slimline II Load Bed Rack or Load Bar Kit.
Your Kit will contain the following items:
1.) A Slimline II Tray or Load Bar set
2.) Universal Load Bed Tracks
3.) Universal Load Bed Legs
This document will help you fit the Slimeline II Tray or Load Bars to your specific vehicle. If you are mounting
a Slimline II Tray, Please continue with Section 1. If you are fitting Load Bars, please refer to Section 2.
installation of slimline ii tray
Note: If you have not fitted the Universal Load Bed Tracks or Legs, fit them as per the Universal Load Bed
Track and Universal Load Bed Led Fitting Instructions (Documents TRBU001 & LASS026).
If your Slimline II Tray is not already assembled, assemble it as per the Slimline II Tray Universal
Assembly Instruction (Document RRSTUNI).
Adjust the two leg assemblies either side of the Midpoint of the Track so that they are 884 mm
A
(
)
apart-outside to outside as shown below.
B
(
)
With your Rack in the upside down position ( Product
Sticker should be upside down ) and working with the
second Slat in, both front and rear, slide two M8 x 25 Hex
Bolts supplied with the Universal Load Bed Legs into
each end of the Slat using the machined Slots as shown.
REV_A00
Universal LOAD BED
TRAY & Load BArs
1
KRLBUNI
INSTALL TIME: 15 mins
Publicidad
