MSW Motor Technics BOH-1400 Manual De Instrucciones página 16

A- hammer: „impacts are on" – for working with cutters / chisels (tool position unlocked – rotation
unlocked)
B- hammer: „impacts are on" – for working with cutters / chisels (tool position locked – rotation blocked)
C- hammer drill: „rotation and impacts are on" – for working with drills
3. Cranckcase cover
4. ON/OFF switch
5. Work indicator light
6. Speed adjustment
7. Handle attachment
8. Cap for carbon brushes
4. 6098 BOH-1600
1. Grip (SDS-plus)
2. Switch
A- hammer: „impacts are on" – for working with cutters / chisels (tool position unlocked – rotation
unlocked)
B- hammer: „impacts are on" – for working with cutters / chisels (tool position locked – rotation
blocked)
C- hammer drill: „rotation and impacts are on" – for working with drills
3. Crankcase cover
4. ON/OFF switch
5. Handle attachment
6. Speed adjustment
7. Cap for carbon brushes
5. Crankcase lubrication
The crankcase should be lubricated regularly. After approximately 20 working hours, check and refill
grease in the crankcase.
16
Rev. 13.10.2016