Descargar Imprimir esta página

Lenco PA-90 Manual Del Usuario página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

SPECIFICATIONS
General
Input Source:
Power consumption:
Bluetooth Range:
LINE IN:
USB Playback:
USB Recharging:
Control Buttons:
LED Indicator:
Battery:
Power Source:
FREQ Range:
Speaker Output Wattage:
Speaker Driver Size:
Speaker Grill:
Full Range:
S/N:
Cabinet Material:
Dimension (W x H x D):
Weight (KG):
Bluetooth
Bluetooth Version:
Bluetooth Profile:
Bluetooth Frequency Band:
Bluetooth Range:
About Sealed Lead-Acid Battery:
This unit works either on the battery pack (Model no.: Tianchang 6-FM-5A, 12V,
5000mAh) or the AC power: unplug the AC Power adapter from the DC input jack to
work on the battery pack (after fully charged); plugging the AC Power adapter while the
battery pack is attached initiates the charging of this battery. The charged LED indicator
lights red during charging, when the battery is fully charged the indicator is off. Fully
charging a run-out battery pack may take 8hours, A fully charged battery pack can
endure approximately 10 hours at 50% volume of continuous playback. This playing
time may vary with the surrounding environment, the volume level of the speaker and
the battery condition. It is advised that you wait 10-20 minutes before recharging the
battery pack if it has turned flat during operation.
Bluetooth/LINE/FM/USB
40W
10M (33 feet)
3.5mm
Full Speed 2.0
1A
Power, Source, Bluetooth pairing, Volume Up/Down,
EQ, MIC (ECHO-/ECHO+), REP, LIGHT
Power (RED LED x 1)
Bluetooth (BLUE LED x 1)
Battery Level LED (RED LED x 1, GREEN LED x 1)
Yes: 12V 5000MAH
DC 15V
2.0A
FM 87.5-108 MHz
60W (RMS)
8" (Woofer) + 2" (Tweeter)
Metal Speaker Grill
Yes
> 50 dB
Plastic
370 X 218 X496 (mm)
8.08KGS
3.0 + EDR
A2DP, AVRCP
2.402 GHz - 2.480 GHz
10 meters
13

Publicidad

loading