Eleglide T1 Manual De Instrucciones página 17

C) Other Parts
Head Sets
Joints
Brakes
Front Suspension Fork
Tires
Wheel Hubs
Pedals
Cranks
Chain
Rims
Sprockets
Saddle and Seat Post
Kickstand
Attention: when lubricating, make sure the lubricant doesn't get on the brake discs and pads.
Otherwise, the brake system may fail to function.
Remove, clean and lubricate the rims annually. Replace them if
necessary.
Continuously check all nuts, bolts and quick-release devices for
tightness.
Lubricate the brake cables slightly with oil monthly. Check the
adjustment and replace the brake parts (blocks, shoes, pads) in time
if they are worn. The cables must be replaced if they are
damaged/down.
Entrust it to experts.
Regularly check for damage, wear, cut and air leakage.
Lubricate the hub bearings monthly. Check and adjust the cones, if
necessary, to prevent the hubs from rubbing against the forks.
Lubricate the bearings and check for tightness.
Lubricate the bearings monthly (unless a maintenance-free center
bracket is installed on the bike). Check whether all center bracket
parts are correctly tightened.
Take it off and clean it every 6 months. The chain must be clean but
not dry.
Frequently check whether the wheels are tight and secure. The rims
should be protected from oil, wax, grease, adhesive, etc. Check
whether the spokes are loosing or missing.
Clean regularly as necessary and grease lightly. Keep the front and
rear derailleur running smoothly by adjusting.
Check whether the screws, nuts and quick-release devices are tight.
Clean and lightly grease it annually.
EN
15