Berner BBCF 14,4V-18V Manual Original página 9

LIGHT INDICATORS
Continuous red
Slow fl ashing green
Continuous green
Fast fl ashing red
Slow fl ashing red
Flashing red/green
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation and
transport are exclusively to be carried out by appropriately trained
persons and the process has to be accompanied by corresponding
experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
MAINTENANCE
If the supply cord of this appliance is damaged, it must only be
replaced by a repair shop appointed by the manufacturer, because
special purpose tools are required
Use only Berner accessories and Berner spare parts. Should
components need to be replaced which have not been described,
please contact one of our Berner service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the ten-digit No. as well as the machine type printed on the label and
order the drawing at Berner.
SYMBOLS
Please read the instructions carefully before starting the
machine.
445 756 - Berner-BBCF14_4-18V.indd Abs1:9 445 756 - Berner-BBCF14_4-18V.indd Abs1:9
Charging
Approaching full charge
Charging is complete
Battery is too hot/cold - Charging
will begin when battery reaches
correct charging temperature
Battery charge is pending -
Charging will begin when the fi rst
pack is fully charged
Damaged or faulty battery pack
Do not burn used battery packs.
Never charge a damaged battery pack.
Replace with a new one.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end of
their life must be collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
This tool is only suitable for indoor use. Never expose tool
to rain.
Class II tool.
Time-lag fuse 3.15 A
T5.0A
European Conformity Mark
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently checked before
being dispatched from the manufacturing plant. If, despite this fact,
there are any defects, please send the item directly to our Client
Services Headquarters or to the nearest service repair shop of the firm
Berner.
The warranty period of 36 months for tools and 12 months for batteries
and chargers starts on the date of purchase which must be verifi ed
using the original receipt. During the guarantee period the producer
guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement for this is that the problem is a material and/or
manufacturing fault. Defects or faults caused by incorrect treatment or
excessive force are not covered by the warranty. Furthermore, only
original accessory parts may be used, which Berner has expressly
identifi ed as suitable for the operation with Berner machines.
You can fi nd out the location of your nearest customer service
workshop in the address list at the back of this document.
9 ENGLISH
07.09.2017 10:40:06 07.09.2017 10:40:06