SFS System isoweld 3000 Manual De Instalación página 15

5. Rolling out the waterproof membrane
• Install the waterproof membrane in accordance with the membrane manufacturer's
instructions.

Compared to seam fixing systems, the isoweld
reduce the overlap of the waterproof membrane.
• Overlaps of the waterproof membrane in the area of the stress plate should be
avoided. See also the isoweld
• Ensure that the underside of the waterproof membrane is dry.
6. Marking the fastening points
• Use the isoweld
top of the waterproof membrane above the stress plate.

Careful marking contributes significantly to a fast welding process.

Clean magnets from debris on a regular basis to prevent membrane damage
3000 / isoweld
®
magnets (turning clockwise) or other suitable aids to mark the
®
system makes it possible to
®
3000m operating instructions.
®
15