SFS intec IP50-B Manual Del Usuario página 27

Warranty
Warranty
1. This setting tool has been carefully checked, tested and subjected to strict quality
control.
2. We warrant the rectification free of charge of defects on the setting tool that occur
at the end user within 24 months of the date of sale and that are due to a material
or manufacturing fault. Individual special regulations apply to the conditions of the
warranty in some countries. We reserve the right to rework defective parts or
replace them with new ones. The ownership of the replaced parts is transferred to
us.
3. Improper usage or handling as well as the opening of the tool by unauthorised
repair centres will render void any claims under the warranty. The warranty
excludes the following: damage caused by penetration of water or other liquids, a
cut or damaged cable, motor damage and mechanical damage caused by
overloading. Wearing parts are also excluded, e.g.
4. Claims under the warranty can only be accepted if defects (as well as transport
damage) are notified without delay. The statute of limitations is not automatically
extended by the provision of service under the warranty.
5. If you should need to make a claim under the warranty, please send the original
proof of purchase together with the tool to one of our SFS points of sale. You will
find these at www.sfsintec.biz.
6. Any further claims by the purchaser – in particular the right to rescission, price
reduction or claims for damages – are excluded due to the warranty obligations
undertaken by us, as far as permitted by the law.
7 . The purchaser has the choice of the right to mitigation (reduction of the purchase
price) or rescission (cancellation of the contract of sale), if we are not able to
rectify any detects that occur within a reason period of time.
chuck jaws, accu etc.
27