Publicidad
Start-up
1.1 SFS intec supplies the automatic setting tool IF240-B in a robust shipping case,
including a plastic cover for protection on the construction site. The cordless screw-
gun is mounted on the housing ready for use. The marker nipple and handle can
be fitted with a few simple steps and the fastener magazine and the stress plate
inserted.
1.2 You will find the necessary tools in the tool bag supplied, including spare parts and
care products.
1.3 Push the T-handle (19) into the mounting tube. Fix the handle at a height that is
convenient for you using the clamping lever.
1.4 Press down the T-handle (19) and at the same time pull down the locking lever (10).
The telescopic tube is extended upward
under pressure from the spring.
1.5 Clamp the mounting plate for the fastener magazine (5) to the housing using the
two
wing nuts.
1.6 Fitting marker nipple: Screw the enclosed marker nipple to the related mating piece
on the base plate.
Do not charge a damaged rechargeable
battery.
1.1
1.4
30
1.2
1.5
1.3
1.6
Publicidad
