Publicidad
Use
Loading the fasteners and discs
2.1 Place the rolled up magazine belt (17) in the fastener magazine (5).
2.2 Guide the start of the magazine belt (17) sufficiently far into the opening on the
feed mechanism (6) such that the first fastener is in front of the retaining latch.
Pay attention to the clicking sound.
2.3 Adjust the height of the fastener magazine (5) to suit the length of the fastener.
For this purpose, pull the spring-loaded toggle lever out of the catch and adjust the
magazine up or down.
2.4 The fastener magazine is correctly adjusted if the fastener belt can be inserted hori-
zontally in the feed mechanism (6).
2.5 Stack the discs in the disc magazine (with the disc recess facing downwards).
2.6 Inserting the weight (16) prevents the discs falling out or tipping.
Do not subject the rechargeable battery to naked flames. Protect the rechar-
geable battery against heat. E.g. continuous exposure to sunlight.
DANGER!
Fall hazard!
A moment of inattention while working on a roof could lead to you falling off.
Only work on roofs that have the appropriate anti-fall measures in place.
Always work with the tool moving forwards, never backwards (see section on
"Working position").
DANGER!
Falling objects!
Falling tools or other objects could cause physical injury.
Secure and clear up the site after work stops for the day.
2.1
2.4
2.2
2.5
2.3
2.6
31
Publicidad
