Descargar Imprimir esta página

Kenwood KDC-152 Manual De Instrucciones página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
Symptom
Sound cannot be heard.
"PROTECT" appears and no operations can be
done.
Sound cannot be heard.
The unit does not turn on.
Information shown on the display is incorrect.
The unit does not work at all.
Radio reception is poor.
Static noise while listening to the radio.
"IN" flashes.
CD-R/CD-RW cannot be played back and tracks
cannot be skipped.
Disc sound is sometimes interrupted.
"NA FILE" appears.
"NO DISC" appears.
"TOC ERROR" appears.
"ERROR 99" appears.
"COPY PRO" appears.
Noise is generated.
Tracks cannot play back as you have intended
them to play.
"READING" keeps flashing.
Elapsed playing time is not correct.
Correct characters are not displayed (e.g. album
name).
Remedy/Cause
Adjust the volume to the optimum level.
Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered with
insulating tape properly, then reset the unit. If "PROTECT" does not
disappear, consult your nearest service center.
The connectors are dirty. Clean the connectors. (page 4)
Reset the unit.
Connect the antenna firmly.
Pull the antenna out all the way.
The CD player is not operating properly. Reinsert the disc properly. If the
condition did not improve, turn off the unit and consult your nearest service
center.
Insert a finalized CD-R/CD-RW (finalize with the component which you
used for recording).
Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
The unit is playing an unsupported audio file.
Insert a playable disc into the loading slot.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot.
Try another disc instead.
The unit is malfunctioning for some reason. Press the reset button on the
unit. If the "ERROR 99" code does not disappear, consult your nearest
service center.
A copy-protected file is played.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Longer readout time is required. Do not use too many hierarchies and
folders.
This is caused by how the tracks are recorded.
This unit can only display letters (upper case), numbers, and a limited
number of symbols.
11

Publicidad

loading