Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1
DESCRIPTION
1.1
PURPOSE
This machine is used for：
•
Shrinking of shrink tubing, packaging and electrical
components.
•
Deforming of articles made from acrylic, PVC, and
polystyrene tubing, plates, and profiles.
•
Welding of thermoplastic polymer, flooring materials of
PVC and linoleum, PVC-coated fabric, wallpaper,
tarpaulins and foils.
•
Soldering of tin, special silver solder, SMD elements,
cable lugs, and for loosening soldered connections.
•
Paint removal. Removal of old coatings of oil paint,
varnish, and synthetic plaster.
•
Drying of color shade samples, filter, adhesives,
construction joints and stucco forms.
•
Joining adhesives. Large surface gluing with contact
adhesives, activation of pressure, or heat sensitive
adhesives, acceleration of bonding processes, releasing of
bonding points as well as releasing or bonding of edge
bond or veneer.
•
Defrosting of icy stairs and steps, door locks, trunk lids,
car doors or metal water pipes.
1.2
OVERVIEW
1
2
3
4
Sleeve
1
Air Outlet
2
LED Light
3
Trigger
4
LOCK-OFF Trigger
5
Handle
6
English
7
5
6
8
11
10
9
Hanger
7
Air Intake
8
Flat Nozzle
9
10 Hook Nozzle
11 Reduction Nozzle
1.3
PACKING LIST
1 Heat gun
2 Nozzles (Flat, Hook,
Reduction)
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
2.1
WORK AREA SAFETY
•
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
•
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
•
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2.2
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
•
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving
parts. Damaged or entangled cords increase the risk of
electric shock.
•
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
•
If operating a power tool in a damp location is
unavoidable, use a RESIDUAL CURRENT DEVICE
(RCD) protected supply. Use of an RCD reduces the risk
of electric shock.
4
3 Manual
Publicidad
