2. The nozzle falls off automatically.
WARNING
Be careful of the high temperature. Do not touch the nozzle
until it cools.
8
OPERATION
WARNING
Always wear eye protection.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
8.1
START THE MACHINE
The machine can not work until the LOCK-OFF trigger (6)
is pushed fully to the left or right.
1. Push the LOCK-OFF trigger (6) to the left or right.
2. Push and hold the trigger (4) to turn the heat gun ON.
8.2
STOP THE MACHINE
1. Release the trigger to turn the machine OFF.
WARNING
Release the trigger and allow the machine to come to a
complete stop.
6
4
NOTE
English
8.3
LED LIGHT
3
The LED light illuminates when the trigger is depressed.
It turns off after a delay when the trigger is released.
8.4
HANGER
8
The machine can be hung in a suitable position.
1. Pull up the hanger.
2. The hanger can be rotated after being pulled up. Rotate
the hanger as needed.
3. Hang the machine in the suitable position.
8.5
ACCESSORIES
FLAT NOZZLE
Label
10
9
EN