3.2- Hydraulic connection diagram
3.2.1- Diagram
200g/h Electrolisys Cell (for PRO400 and PRO600 units)
1. FILTRATION
2. CONTROL PANEL
3. FLOW SWITCH
4. ELECTROLYSIS CELL
5. PRO750 UNIT(*)
(*) All the units follow the same hydraulic scheme, connecting in parallel as
many cells as power modules.
It is highly recommended to install a by-pass system, to be able to block the
water flow in each cell for maintenance purposes.
31 / 46
Manual PRO250V2 v.1