Publicidad
3.
Press again the SET key to set the minutes. The minute digits start
flashing.
4.
Use the OUT/+ key to set the minutes.
5.
Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try to receive the signal between 0:00 and 6:00 am every
day despite it being manually set, if the WWVB reception function has been
set ON. When it does receive the signal, it will change the manually set
time into the received time. During reception attempts the WWVB tower
icon will flash. If reception has been unsuccessful, then the WWVB tower
icon will not appear but reception will still be attempted the following hour.
CALENDAR SETTING:
The date default of the Weather station is 1. 1. 2006. Once the radio-
controlled time signals are received, the date is automatically updated.
However, if the signals are not received, the date can also be set manually.
1.
The year starts flashing.
2.
Use the OUT/+ key to set the year (between year 2003-2029).
3.
Press the SET key again to confirm and to enter the month setting.
The month starts flashing.
4.
Use the OUT/+ key to set the month.
5.
Press the SET key again to confirm and to enter the date setting
mode. The date starts flashing.
6.
Use the OUT/+ key to set the date.
Confirm all calendar settings with the SET key and enter the
7.
Temperature unit setting.
°C/°F TEMPERATURE SETTING:
The temperature display can be selected to show temperature data in °C or
°F (Default °F).
1.
Use the OUT/+ key to toggle between "°C" or "°F".
Year
Date and month (24hr time format)
Month and date (12hr time format)
Flashing
32
Publicidad
