Publicidad
Idiomas disponibles
Idiomas disponibles
of the device.
Do not modify the device for safety reasons. The warranty does not cover damage caused by user
modifications to the device.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
The warranty does not cover damage caused by disregard of certain guidelines in this manual and
the dealer will not accept responsibility for any ensuing defects or problems.
The warranty does not cover the LEDs and mechanical wear.
Use the appropriate current and power supply (see Technical Specifications).
Do not use lighting effects continuously: regular operation breaks will prolong their lives.
There may be a particular smell when activating the device for the first time. This is normal and any
smell will gradually disappear.
Keep this manual for future reference.
4.
Features
interchangeable modules
sound and speed-controlled
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
built-in microphone
2
music sensitivity dial
3
speed dial
6.
Operation
General Operation
1.
Choose a suitable mounting location according to the Safety Instructions and the General
Guidelines.
2.
Make sure the module connections [6] are inserted into the central controller.
3.
Insert the plug from the included AC adapter into the power input [5] of the modular organ.
4.
Insert the AC adapter into a suitable power socket.
5.
Switch on the device with the on-off switch [4].
6.
Set the microphone sensitivity with the music sensitivity dial [2]; set the speed with the speed
dial [3]. The modular organ will now react to ambient sounds through the microphone [1].
7.
Switch off the device with the on-off switch [4] and disconnect from the mains after use.
Changing the Modules
You can easily choose the lighting sequence of this light organ by interchanging the modules:
1.
Disconnect the light organ from the power supply.
2.
Disconnect all module connections [6] from the central controller.
3.
Carefully slide each module from the central controller and slide them back onto the controller in the
desired order.
4.
Reconnect each module to the central controller using the module connections [6].
5.
Proceed as described under General Operation from 3 to 7.
7.
Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the mains.
2.
Let the device cool down.
Cleaning
Clean the external optics and the housing with a slightly moist, soft cloth. Do not immerse the device
in any liquid.
Always be sure to dry all parts completely before plugging the unit back in.
V. 01 – 17/06/2014
VDLL6RL2
4
on-off switch
5
power input
6
module connections
4
©Velleman nv
Publicidad
