Publicidad
Idiomas disponibles
Idiomas disponibles
Freezer temperature control
The freezing temperature is relatively low in the "COLDER" position (colder), and
higher in the "COLD" position (colder), so the "NORMAL" position is usually used.
When the ambient temperature is high in summer, the temperature should be
within the range of "NORMAL" to "COLD". If the ambient temperature is above
35°C, the "COLD" position should be used.
With the lowest ambient temperature in winter, the temperature must be in the
range from "NORMAL" to "COLD". If the ambient temperature is below 10°C, the
"COLDER" position should be used.
Door opening alert
When the door is opened, an acoustic signal will sound. If the door is not closed
within two minutes, an alert will sound until the door is closed. Press any button
to stop the alarm.
Fault Indicator
The following codes may appear on the display to alert you to appliance
malfunctions. Although the refrigerator may continue to operate while some of
these faults are displayed, the user should contact service as soon as possible to
ensure optimum operation of the refrigerator.
Error code
Note: The InstantFreeze function is designed to maintain the nutritional value of the
food in the freezer and can freeze the food in the shortest possible time. If you freeze a
large amount of food at a time, it is recommended to activate this function and insert
the food. The freezing speed will increase and you can quickly freeze the food,
effectively lock its nutrients and facilitate its storage.
Control
freezer
(summer)
Description of the failure
Failure of the cold room temperature
E1
sensor
Freezer chamber temperature
E2
sensor failure
Temperature sensor failure in the
E3
cooler drawer
Freeze defrost sensor detection circuit
E5
fault
E6
Communication error
Ambient temperature sensor error
E7
(winter)
16
V.2
Publicidad
