Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2-C
If you are attaching the anti-tip strap to metal furniture:
1.
Locate a secure area near the top of the furniture that is at least 3 mm (1/8 in.) thick.
2.
Drill pilot hole to a depth of 13 mm (1/2 in.) using a 6 mm (15/64 in.) diameter drill bit.
3.
Place the mounting plate
CAUTION: To avoid potential injuries or property damage!
1.
Ensure mounting plate
2.
Ensure all straps
10
P
over the drilled hole on the back of the furniture. Insert and tighten screw
P
is securely fastened to the furniture.
S
are tight.
12
.
P
S
12
S
Publicidad
