Sanus accents A701 Manual De Instrucciones página 12

STEP 3
Attach the Wall Plate and the Anti-tip Strap to the Wall (Wood Stud ONLY!)
1. Locate stud. Verify the center of the stud using an awl, a thin nail, or an edge to edge stud finder.
CAUTION:
Avoid potential personal injuries and property damage!
●
Drywall covering the wall must not exceed 16 mm (5/8 in.).
●
Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.).
2. Level the wall plate template
1
12
13
and mark the hole locations.
2
13