Nfc Function - Silvercrest SLB 10 A1 Instrucciones De Uso

Altavoz bluetooth
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE
If you want to connect the currently connected speaker to another
Bluetooth
nect the currently connected Bluetooth
Alternatively, you can deactivate the Bluetooth
connected Bluetooth
of beeps and the operating/charging LED 9 will flash alternatively
orange and blue. The speaker is now ready to be paired with
another Bluetooth

NFC function

The NFC function (Near Field Communication) can be used
to establish a Bluetooth
NOTE
Using the NFC function to establish a Bluetooth
works under the following conditions:
The Bluetooth
top of the speaker.
The speaker is not connected to another Bluetooth
Bluetooth
Make sure that the speaker is switched on.
SLB 10 A1
device, start by pressing the
®
device. You will hear a descending series
®
device.
®
device is less than 1 cm from the NFC logo on the
®
.
®
button 6 to discon-
device from the speaker.
®
®
connection quickly and easily.
®
connection only
®
GB │ MT
function on the
device via
®
 89

Publicidad

Tabla de contenido
loading

Tabla de contenido