Publicidad
Idiomas disponibles
Idiomas disponibles
Kit Components
The connection kit for activating the factory-
installed flood sensor includes the items shown
below. If any item is missing, speak with your
account representative.
For all valve assemblies including the flood sensors
compatible with this kit, refer to ordering code
88009418 (FP-BF-BMS) at watts.com.
A. Activation module with 8' conductor cable and ground wire
NOTICE
When installing an air gap, attach the air gap brackets directly
onto the flood sensor.
Requirements
• #2 Phillips screwdriver
• 120VAC, 60Hz, GFI-protected electrical outlet
(for kit power adapter), or power source ranging from
12V to 24V
• Wire stripper
B. 24V DC power adapter
2
Publicidad
