Black and Decker BAPUV350 Manual De Instrucciones página 7

SET UP & USE
PARTS & FEATURES
Wind grating
Control
Panel
VOC
sensor
Air inlet
OPERATING INSTRUCTIONS
Before using purifier for the first time, make sure all packaging material is removed
including the plastic wrapping on each individual filter. Open the back cover of the
filter screen and remove all plastic wraps and packaging material before use.
NOTE: Refer to CLEANING AND MAINTENANCE section of this manual for
information on how to access and install the filter.
Place the air purifier on a firm, level surface, making sure nothing is obstructing the
airflow on any side of the air purifier.
Plug the power cord into a 120V AC electrical outlet. The POWER
illuminate in red. Touch POWER to turn ON the air purifier. It will illuminate blue and
the air purification speed will default to AUTO mode.
Air quality
indicator display
Wheel
Handles
Filter cover
Sensor cover
Dust cover
HEPA/Carbon
Filter
Ozone
removal filter
Electrostatic
Precipitator
Filter
Pre-filter
light will
Page 7