Publicidad
Idiomas disponibles
Idiomas disponibles
use
Inserting batteries
1.
Press down on the top of the battery compartment and slide it out.
2.
Install the AAA batteries, ensuring the correct polarity.
3.
Then push and slide the battery compartment into the back of the pointer in until it stops.
Installing the pointer
1.
Remove the USB receiver from the compartment and plug it into a free USB port on your computer.
2.
The operating system automatically detects the pointer. When the "Installing pilot software. Your device is ready
to be used." information window appears on the bottom right of your screen, your pointer is ready to be used.
3.
Place the ON/OFF switch on the side of the pointer in ON position to turn it on.
18
The receiver has an operating radius of approximately 20 metres. The communication range may vary depending
on obstacles (person, metal, wall, etc.) or the electromagnetic environment.
Use
•
Turn on the pointer using the ON/OFF switch, then use the touch navigation button like a mouse to move your
cursor and click.
•
Press the PLAY button to launch a presentation.
•
Use the BACK and NEXT buttons to move from slide to slide.
Press the BLACK SCREEN button to pause the display.
•
•
Press the EXIT PRESENTATION MODE button to exit the presentation.
19
Publicidad
