essentiel b ALPHA Instrucciones De Uso página 11

• Press the laser activation button to generate a laser beam.
• Press the BACK and NEXT buttons simultaneously to switch from PowerPoint mode* (light ashes slowly) to
Keynote mode* (light ashes quickly). The pointer is set to PowerPoint* mode by default.
Note :
1. After the installation of USB receiver, please make sure the laser pointer is on within 1 minute. Otherwise, the
USB receiver is needed to unplug and plug on the computer again if the receiver is not paired with the laser
pointer.
2. Within 20cm of the receiver, press and hold the PLAY button and switch ON at the same time, the laser pointer
will automatically search for the receiver and establish a connection.
20
troubleshooting
• If your pointer does not work: remove the USB receiver from your computer's USB port and turn off the pointer.
Insert the receiver into another USB port and turn the pointer back on. Press the BACK and NEXT buttons
simultaneously until the light ashes red. The pairing process will begin. The process is complete when the
light stops ashing.
• When the light ashes continuously, it means that the batteries need to be replaced. Replace them with the
indicated batteries.
simplified EU declaration of conformity
The undersigned, Sourcing & Création, hereby declares that the ESSENTIELB Laser Pointer Alpha complies with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at:
https://www.boulanger.com/info/assistance
21