EarthQuaker Devices Disaster Transport Manual De Instrucciones página 5

RATE
Controls the speed of the modulation. The Rate operates in three ranges (Slow/Fast/
Medium) selected by the Mod Speed toggle switch. The Disaster Transport OG uses
a Ramp wave for the modulation. You'll find this to be much more intense than most
modulated delays. Think of it as a traditional Triangle wave that falls off a cliff in mid-cycle,
creating a drastic pitch bend in its wake. Or don't and just think about whatever you want.
INTENSITY
Controls how much the LFO modulates the delay time. More subtle chorus type effects
are achieved with less intensity and more intensity will yield wild pitch stretching and
bending. The overall modulation style can be made more or less subtle by using the Mod
Mode toggle switch to select Bend or Stretch.
MIX
Sets the volume level for the delay signal. Hear more of what you just played 30-600ms
ago by turning this up.
REPEATS
Controls the intensity of delay feedback from no repeats at zero to self-oscillation at max.
Let the past pile up on you until it implodes.
TIME
Sets the delay time from around 30ms at zero to 600ms at max. Everyone needs more
time; all we can offer you is about 600ms worth.
MOD SPEED
Three position toggle switch that sets the range in which the Rate operates.
MOD MODE
Two position toggle switch to choose the modulation style. Bend is more of a traditional
chorus type modulation and Stretch is a wilder pitch stretching modulation.
MODULATE
This footswitch features Flexi-Switch® Technology and turns the modulation on and off.
ACTIVATE
This footswitch features Flexi-Switch® Technology and turns the effect on and off.
5