Perel TC90602 Manual Del Usuario página 6

4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
4
5
6
5. Assembly
1. Before using the ash cleaner, make sure all accessories are correctly fastened.
2. Unfasten the fixing clips and remove the cover from the ash collector.
3. Attach the filter to the lower part of the cover.
4. Replace the cover on the ash collector and fasten the fixing clips.
6. Use
General Use
1. Before using the ash cleaner, make sure to install the filter and to fix the cover to the
collector with the clips.
2. Attach the flexible hose to the ash collector.
3. Connect the appliance to the mains. Switch on the appliance.
Vacuuming Ashes
Leave the ashes to completely cool down prior to vacuuming them!
1. Check if the device is assembled well before using it.
2. To vacuum ashes, connect the hose to the suction connection.
3. Insert the power plug into the mains socket.
4. Switch on the device.
5. Vacuum the cold ashes.
6. Switch off the device.
7. Unplug the device from the mains.
8. Remove the cover from the ash collector.
9. Throw away the ashes in an environmentally safe way.
V. 03 – 15/07/2019
handle
blowing connection
top cover
metal clip
ash collector
aluminium suction nozzle
TC90602
7
8
9
10
11
6
hose
suction connection
metal barrel cap
on-off switch
washable HEPA filter
©Velleman nv