Characteristics Of The Electronic Regulation; User Interface - AERMEC anz Manual De Instrucciones

The control panel allows the quick
setting of the working parameters of
the machine, their visualisation in any
moment, and an immediate summary
of the machine's working state. The
display is made up of 3 figures and 4
LEDs, to signal the type of working,
the visualisation of the parameters set
or measured, and any alarms that have
been activated. The card memorises
Display with bright LEDs, and display for panel assembly
Characteristics:
Row number
Column number
Character height (mm)
x100h
Characteristics of the regulation
all the settings saved after every
modification and used for the restarting
after an interruption owing to power
failure.
With the installation of the remote
control panel PR1 (accessory), it is
possible to control from a distance
the switching on and off, the setting of
x100h
the way of working (cold-hot), and the
visualisation of the alarms summary,

User interface

1
3
10
Remote connections
• PRV
Intelligent remote
panel, repeats the
f u n c t i o n s o f o n -
machine command,
can be used at up to
150m.
SEL
with a red indicator light (alarm). With
the installation of the remote control
panel PRD (accessory) on the other
hand, it is possible to repeat from a
distance all the functionalities of the
on-machine controls. The panel has 4
multi-function keys: by pressing one
or two keys at the same time, you can
control all the parameters and the
functions of the unit.
SEL
x100h
PRV wall or panel
assembly (ACCESSORY)
µ
chiller
• PR1
Simplified remote
panel, carries out
basic controls, can
A
L
be used at up to
A
R
M
30m.
SEL
compact
3