Metra 99-7353B Instrucciones De Instalación página 2

1. Unclip and remove the factory
radio trim panel including the a/c
vents. (Figure A)
2. Remove (4) Phillips screws
securing the radio in the dash.
3. Remove (2) Phillips screws
securing the start/stop switch if
equipped. (Figure B)
4. Remove (4) Phillips screws
securing the storage pocket
(Figure B)
(Figure A)
Dash Disassembly
5. Remove the (8) Phillips screws
securing the a/c vents then unclip
and remove them from the radio
trim panel. (Figure B)
6. Unclip and remove the hazard
switch. (Figure B)
7. Remove (3) Phillips screws
securing the passenger air bag
indicator. (Figure B)
Continue to kit preparation
99-7353B
Step 3
(Figure B)
2
Step 5
Step 6
Step 4
Step 7