Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-7350B
Hyundai Veloster 2012-up
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted Matte Black
KIT COMPONENTS
• A) Radio Trim Panel • B) Pocket • C) Brackets • D) (4) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 - Hyundai/Kia harness 2010-up • HYKIA-01 - Hyundai/ Kia amplified system interface
Antenna Adapter: • 40-Kl11 - Hyundai/Kia antenna adapter
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench
METRA. The World's best kits.
APPLICATIONS
99-7350B
C
™
1-800-221-0932
Dash Disassembly
– Hyundai Veloster 2012-up .................................... 2
Kit Assembly
– ISO DIN radio provision with pocket ....................... 3
D
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
Table of Contents
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-7350B
Resumen de contenidos para Metra 99-7350B
- Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-7350B APPLICATIONS Table of Contents Hyundai Veloster 2012-up 99-7350B Dash Disassembly – Hyundai Veloster 2012-up ........2 Kit Assembly – ISO DIN radio provision with pocket ....... 3 KIT FEATURES • ISO DIN radio provision with pocket • Painted Matte Black KIT COMPONENTS • A) Radio Trim Panel • B) Pocket • C) Brackets • D) (4) #8 x 3/8” Phillips screws CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation.
- Página 2 99-7350B Dash Disassembly 1. Unclip and remove the climate control/vent panel around the radio. (Figure A) 2. Remove (4) Phillips screws securing the radio. (Figure B) Continue to kit assembly (Figure A) (Figure B)
- Página 3 99-7350B Kit Assembly ISO DIN head unit provisions 1. Clip the radio trim panel into the climate control/vent panel (Figure A) 2. Mount the pocket to the radio brackets with the (4) #8 x 3/8” Phillips screws supplied. (Figure B) 3. Slide the head unit into radio brackets and secure with screws supplied with the unit. (Figure C) (Figure B) (Figure C) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra (Figure A) and/or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 5. Reassemble dash in reverse order of disassembly.
- Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-7350B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
- Página 5 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7350B AplicAciones Indice Hyundai Veloster 2012 y mas 99-7350B Desmontaje del tablero – Hyundai Veloster 2012 y mas ....... 2 Ensamble del kit – Provisiones de unidad central ISO DIN ....3 cArActerísticAs del kit • Provisión de unidad central ISO DIN con cavidad • Pintura negro mate componentes del kit • A) Panel de moldura para radio • B) Cavidad • C) Soportes para radio • D) (4) tornillos Phillips #8 de 3/8”...
- Página 6 99-7350B Desmontaje del tablero 1. Desenganche y quite el control de clima/panel de ventilación que rodea el radio. (Figura A) 2. Quite los (4) tornillos Phillips que sostienen el radio. (Figura B) Continuará la preparación del kit (Figura A) (Figura B)
- Página 7 99-7350B Ensamble del kit Provisiones de unidad central ISO DIN 1. Enganche el panel de la moldura del radio en el panel de control de clima/ventilación. (Figura A) 2. Monte la cavidad en los soportes del radio con los (4) tornillos Phillips #8 de 3/8” suministrados. (Figura B) 3. Deslice la unidad central en los soportes del radio y sujétela con los tornillos suministrados con la unidad. (Figura C) (Figura B) (Figura C) 4. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda (Figura A) que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente. 5. Vuelva a armar el tablero al revés de...
- Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7350B EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry. móviles más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.installerinstitute.com o llame al...