LG 50QNED80SRA Manual Del Usuario página 7

Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement
(Depending upon country)
Digital
Television
system
SBTVD
Channel
coverage
(Band)
External
antenna
impedance
• Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced
8K images will vary depending upon the source content (Depending upon model).
Operating Temperature
Operating Humidity
* This specification range applies to TV wall mounts when adjusting for proper viewing angle.
• The energy information provided on the product is shown in accordance with the applicable regulations of each respective country, (Depending upon the
country).
- The Energy consumption was measured in accordance with IEC 62087.
• The actual energy consumption depends on the usage environment, (Example: content watched, TV settings, etc.).
• For information of the power supply and power consumption, refer to the label attached to the product.
- The typical power consumption is measured in accordance with IEC 62087 or each country's energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending upon the model or country, the typical power consumption may not be on label.
Specifications
Broadcasting Specifications
Analog
NTSC-M/PAL-N/
PAL-M
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-135
0 °C to 40 °C
Less than 80 %
Conditions for Wall Mount Installation
Tilt Angle
Digital Analog
NTSC-M/PAL-N/
DVB-T/T2
PAL-M
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-125
75 Ω
Environment Condition
Storage Temperature
Storage Humidity
AC 100-240 V~ 50/60 Hz
Digital
ATSC, 64 & 256 QAM
VHF 2-13,
UHF 14-69,
DTV 2-69,
CATV 1-135,
CADTV 1-135
-20 °C to 60 °C
Less than 85 %
0° - 15°
Analog
NTSC-M
7