Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Auto Operation
Healthy Dehumidification Operation
12 Air Conditioner
<For Cooling Model>
The temperature and fan speed are automatically set by the electronic
controls based on the
actual room temperature.
If you feel hot or cold, press TEMPERATURE SETTING buttons for more
cooling or heating effect.
You cannot switch the indoor fan speed. It has already been set by the
Auto Operation Mode rule.
During Healthy Dehumidification Operation
❏ If you select the dehumidification mode on the OPERATION MODE
SELECTION BUTTON, the product starts to run the dehumidification
function.
It automatically sets the room temperature and airflow volume to the best
condition for dehumidification, based on the sensed current room
temperature.
In this case, however, the setting temperature is not displayed on the remote
controller and you are not able to control the room temperature either.
❏ During the healthy dehumidification function, the fan speed is automatically
set according to the optimization algorithm responding to the current room
temperature status, so that the room condition is kept healthy and
comfortable even in the very humid season.
❈ Please select the code
as per your requirement.
Code
Feel
2
Cold
1
Slightly cool
0
Neutral
-1
Slightly warm
-2
Warm
MODE
MODE
Publicidad
