Maintenance
Expected service life of the nursing bench is 10 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the bench to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated.
It is recommended that service inspection is done once a year.
Service inspection
• Check the hinges
necessary.
• Check the PVC canvas
en
14
Disconnect mains before
removing the covers.
on the bench and the safety rail
①
for damage and replace if necessary.
③
1
2
1
3
2
. Tighten if
②