Descargar Imprimir esta página

Crosley CR6019D Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Needle Replacement
Removing Needle
1. Gently pull down the front edge of the needle.
2. Pull needle forward.
3. Pull out and remove.
Installing Needle
1. Position the needle with its tip facing down.
2. Line up the back of the needle with the cartridge.
3. Insert the needle with its front end at a downward angle and gently lift the
front of the needle upward until it snaps into place.
USB Recording
To record the vinyl into digital file formats such as MP3, you can use the USB
Output Jack to connect this unit to your computer's USB port and use the
recording program of your choice.
1. Use the supplied USB cable to connect the unit to your computer.
2. Turn on the power of the turntable.
3. Run the recording program of your choice.
Note:
In case you do not have a recording program installed, Audacity is a free software to
use, distributed under the GNU General Public License (GPL). For most updated
version of Audacity and instructions on how to use it, please visit Audacity website:
http://www.audacityteam.org/. Crosley would not carry responsibility or support for third
party software and all downloads should be carried out at user's own responsibility.
Depending on the operating system and software that you are using, you may need to
make some changes on settings of the operating system and/or software before
starting the recording process. As a general guideline, the recording source/input
should be set to Microphone USB audio codec. And it is recommended to set it to 2
channel, 16 bit, 48000Hz (DVD Quality)
Make sure the USB connection is made to the USB jack of your computer directly
instead of a USB hub to ensure a successful connection.
7

Publicidad

loading