Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
TS-155:
TS-255:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Flash-rate:
Number of colours:
Number of gobos:
Outside diameter of the gobos:
Image diameter of the gobos:
PAN-movement:
TILT-movement:
Dimensions (LxWxH):
Weight:
Fitting lamp TS-155:
PHILIPS CDM-T 150W/830 G12
OSRAM HQI-T150/NDL PRO 6000h 150W G12
Topspot HIT 150W G-12 6000h nw
GE CMH 150/T G12 6000h
OMNILUX OMD 150W G12 6000h 4200K
Fitting lamp TS-255:
OMNILUX OSD 90V/250W GX-9,5 2000h 6700K
OSRAM HSD250 90V/250W GY-9,5 2000h
PHILIPS MSD250 90V/250W GY-9,5 2000h
OSRAM HSD250/2 90V/250W GY9,5 3000h 7800K
PHILIPS MSD250/2 90V/250W GY-9,5 2000h
SYLVANIA BA250/2 SE D 90V/250W GY-9,5
Recommended controllers:
EUROLITE DMX Operator
Wizard-512 DMX-Software + Interface
Wizard-1024 DMX-Software + Interface
Maximum ambient temperature t
Maximum housing temperature t
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Please note: Every information is subject to change without prior notice. 04.01.2006 ©
230 V AC, 50 Hz ~
320 W
460 W
6
3-pin XLR
via built-in microphone
1-7 Hz
7 dichroic + white
7 rotating gobos and open
25 mm
20 mm
within 180°
within 90°
555 x 270 x 285 mm
8 kg
No. 91014045
No. 91201794
No. 91201797
No. 91201800
No. 91201805
No. 89106005
No. 89106010
No. 89106015
No. 89106110
No. 89106115
No. 89106120
No. 70064520
No. 51860102
No. 51860110
:
45° C
a
75° C
(steady state):
B
0.5 m
0.5 m
F 4 A, 250 V
31/58
51786025_V_1_4.DOC