ARDES AR4P01 Folleto De Instrucciones página 7

Before plugging or unplugging the appliance, make sure the operating
switch is in the OFF position.
Before connecting or disconnecting the appliance, make sure the function
dial (1) is in the off position.
There are 6 selectable functions, 3 of which have automatic oscillation:
FAN for ventilation, LOW for low-power heating and HIGH for full-power
heating.
Adjust the thermostat (2) by turning the switch in a clockwise direction.
The appliance is equipped with a switch which adjusts the thermostat by
stopping the air flow as soon as the desired ambient temperature is
reached; hot air will start to flow again when the ambient temperature
drops.
The luminous indicator shows that the appliance is turned on.
The appliance is equipped with an automatic turn-off system in case of
accidental fall.
Before you put the appliance back into its packaging, make sure it has
cooled down sufficiently.
1
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
This appliance does not require any special maintenance.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
INSTRUcTIONS fOR USE
MAINTENANcE
2
7