Publicidad
Idiomas disponibles
Idiomas disponibles
Max. Tightening Torque
Max. Breakaway Torque
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (8) and pull
the battery pack (9) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (9) onto tool until it locks in
place.
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (2).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket.
CAUTION
1English1
SPECIFICATIONS
Model Number
Voltage
Drive
Max. Reverse Torque
No Load Speed
Impacts per Minute
Tool Weight
ASSEMBLY
Always set switch (5) to off position when installing and
removing socket.
ARI2061-3B
18 Vdc
3/8" Square
190 ft-lbs (260 Nm)
300 ft-lbs (400 Nm)
400 ft-lbs (540 Nm)
0-2000 RPM (/min)
0-3000 IPM
3.63 lbs (1.65 kg)
(For AB2045L)
English
-8
ARI2061-3
4.24 lbs (1.93 kg)
(For AB2045L-2)
Publicidad
