Publicidad
STEP 17
IMPORTANT! THE BACK PANELS ARE A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn your unit over on its front side as shown.
Attached the back panels as shown nailing straight into
the raw edges.
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
B
ameriwoodhome.com
9
(x74)
BACK
PANEL
Raw Surface
BACK
PANEL
G
Flush bottom edge of the back
panels with the bottom edge
of bottom (G).
24
BACK
PANEL
Raw Surface
Notice:
Now tighten screws (6) in
angle brackets (7) that were
left loose in step 10.
9
Publicidad
