Publicidad
12.The toy must be used at places that are well lit during the day, in order to avoid incidents.
13.Before you fold and store the stroller, you must remove the moving parts – carry cot, mama bag and luggage basket, if
there are such items.
14.The toy must be stored at a dry and well ventilated place; do not leave it at humid places or close to sources of heat or
under the harmful effects of direct sunlight, rain, wind and snow.
15.Keep the packaging of the toy at place that is away from the reach of your children in order to avoid the risks of
suffocation and/or strangulation, resulting from entanglement of the packaging around the child or external blocking of
the airways through the mouth or nose.
The assembly of the toy must be performed in compliance with the exact instructions, (FIG. 1 to 9). After each operation
is performed, check and make sure that you have followed the instructions properly.
1.Unfold the stroller. See Figure 1.
2.Fix the metal holder. See Figure 2.
3.Fix the safety locks. See Figure 3.
4.Slide the front axle of one of the front wheels to the opening in the front part of the frame. Fix it using white bushing
and cap. Attach and the other front wheel. See Figure 4.
5.Attach the canopy to the holders on the frame of the doll basket. See Figure 5.
6.Fix the doll basket to the stroller frame using the adapters. See Figure 6.
7.Attaching the rear wheels: Slide the rear axle through the openings in the frame and attach a wheel on each side of the
axle. Fix the wheels using the white caps and decorative caps. See Figure 7.
8.Push handle: press the buttons of the side of the handle to adjust the height of the handle. The handle can be
transferred to the other side. Press the buttons in the base of the handle and transfer it to the other side. See Figure 8.
9.The doll basket can change in seat: take it out from the frame of the stroller, take off the basket's cover and transform
the basket in seat, as you lock front and sideway sides on the bottom of the basket. After this, place the seat on the
stroller's frame. See Figure 9.
➢ Cleaning
1.Regularly check the working order of the individual parts.
2.Clean only the surfaces with a soft cotton cloth – dry or slightly wetted with water or soft detergent.
3. Do not wash with running water. Do not clean with detergents containing abrasive particles or aggressive agents such
as acetone, ammonia, bleach or alcohol.
4. Always dry the toy. It is possible for the mold to accumulate, if the product is stored while damp.
➢ Maintenance
5. Store at a dry and clean place. Do not expose to direct sunlight, rain, humidity or sudden changes of the temperature.
6. If you find any damaged or broken parts of the toy or surfaces with cracks, stop its use by children until the damage is
repaired.
Made for MONI TOYS; Producer: MONI TRADE LTD; Address: Bulgaria, Sofia, Trebich, Dolo str. 1
Tel.: +359 2 / 936 07 90 ; www.moni.bg
DE
•WICHTIG! SORGFÄLTIG DURCHLESEN UND ZUM NACHLESEN AUFBEWAHREN!
•DIE GEBRAUCHSANLEITUNG ENTHÄLT WICHTIGE INFORMATIONEN ÜBER DEN ZUSAMMENBAU, DIE RICHTIGE NUTZUNG
UND WARTUNG DES PRODUKTS. DIE PUPPENWAGEN ENTSPRICHT DEN ANFORDERUNGEN DER EUROPӒISCHEN NORM EN
71-1/ 2/ 3. ACHTUNG! DIE PLӒNE UND ABBILDUNGEN DIESER ANWEISUNG DIENEN NUR ZUR VERANSCHULICHUNG UND
ZU INFORMATIONSZWECKEN. DAS VON IHNEN GEKAUFTE PRODUKT KANN UNTERSCHIEDE AUFWEISEN.
➢ ACHTUNG!
1. Nur unter der Aufsicht eines Erwachsenen verwenden!
2. Dieses Spielzeug ist nicht für Kinder unter 3 Jahren geeignet. Kleine Teile.
3. Das Spielzeug ist entworfen, um Puppen zu tragen, nicht Babys, Kinder und Haustiere!
4. Fern von direkten Wärmequellen halten - Heizungen, offenes Feuer usw.
5. Die Verpackung enthält kleine und Nylon-Teile. Erstickungs- und Erstickungsgefahr! Lassen Sie Kinder nicht auspacken
und zusammenbauen.
6. Einer Erwachsene das Produkt zusammenbauen! Lassen Sie es nicht zu Kindern jünger als drei Jahren mit dem Produkt
zu spielen, bis es vollständig zusammengebaut ist. Kleinteile! Erstickungsgefahr!
7. Um die Sicherheit Ihres Kindes zu gewährleisten, folgen Sie die Anweisungen zum Zusammenbau.
ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
SICHERHEITS- UND WARNHINWEISE
6
Publicidad
